What is MAThread

The greatest challenge faced in the assembly of automobile has been cross threading. Assembly
failures due to cross threading and galling are both disruptive and expensive.

The innovative MAThread® completely eliminates this problem, lowering costs for auto makers.
It was realized that MAThread is not only the solution to this problem but almost all the problems associated with car assembly, which accounts for approximately 97% of the problems.

MAThread® is advantageous because it is unaffected by excess paint and it is sensitive towards tool speed. They correct off-angle installations and force component alignment without thread damage as well as improve operator ergonomics by reducing repetitive stress.

MAThread® immensely saves cost because it eliminates the money outflow associated with assembly failures, repairs, scrap, downtime, as well as the need for warranty service. This adds up to multibillion dollars saved for major car companies from rework and labor. MAThread efficiency and reliability has made it a favorite among top companies who wish to curb expensive malfunctions which lead to fixing that’s free for consumers due to warranty and the like.

The discovery of MAThread® has revolutionized car manufacturing, drastically changing a process that was originally faulty as well as pricey. Now, with its introduction, it is not only capable and reliable, but also versatile and adaptable. It can be used for numerous products, giving almost a perfect fit for all. By choosing a MAThread capable company, you can be assured of cost efficiency and reduced labor, which will hugely dampen unnecessary spending and overtime.

Looking for fastener manufacturers? Please contact us at: www.SpecialtyScrew.com

Specialty Screw Corporation located in Rockford Illinois is a fastener manufacturer of Cold Headed Products, Automotive Screws, Automotive Fasteners, Metric Fasteners, and Engineered Fasteners. Markets served include the Automotive, Electrical, Recreational, Hardware, Outdoor Power Equipment, Lawn & Garden, Distribution, Hand Tools and Molded rubber/plastic products industries. Specialty Screw Corporation is also licensed to manufacture MAThread® and MATpoint®.

MAThread® and MATpoint® are patented thread designs.
MAThread and MATpoint are registered trademarks of MAThread Inc.

The Fastener Manufacturer You Can Rely On

There are many different types of fasteners that are available. So, what are the criteria that you should focus on when looking for the right fastener manufacturer for your specific product demands?

First of all, you need to know that there are a wide range of fastener varieties to choose from, which includes screws, bolts, rivets, double end studs, etc… to name a few.

Fasteners are made of various types of materials and this is due to the nature of how they are used. You need specific materials for every different fastener. Stainless steel has always been the first choice for the manufacturing of fasteners. Some say that it is due to its ability to stand against the cosmetic corrosion, and also due to its nature that is much less magnetic compared to regular steel fasteners.

For your fast reference, there are many types of materials that can be chosen. It could be platinum, common steel, plastic or any other materials for custom made fasteners depending on their purpose.

One important aspect that you need to put into consideration before ordering your fasteners is to find out what technology is in place to manufacture it.

Implementing cold form technology allows fastener manufacturers to produce higher quality fasteners while keeping the production cost low. This technology also enables fastener manufacturers to provide fasteners with greater strength, reliability, and durability. It could also help to reduce the waste of raw materials compared to screw machining.

Another advantage would be that cold form technology enables engineers to prepare complicated fastener design and shapes in a single operation thus saving time and production cost.

Specialty Screw Corporation would be happy to help you with any questions regarding you fastener concerns. Please contact us at: www.SpecialtyScrew.com

Specialty Screw Corporation located in Rockford Illinois is a manufacturer of Ball Studs, Cold Headed Fasteners, Cold Headed Products, Cold Headed Special Fasteners, Collar Studs, Collar Bolts, Automotive Screws, Automotive Fasteners, Metric Fasteners, Special Automotive Fasteners, Bolts, Special Bolts, Engineered Fasteners, Special Cold Forming, Special Cold Heading, Special Fasteners, Special Pins, Special Rivets, Tapped Valves, Double End Studs, and Synergistic Assemblies. Markets served include the Automotive, Electrical, Recreational, Hardware, Outdoor Power Equipment, Lawn & Garden, Distribution, Hand Tools and Molded rubber/plastic products industries. Specialty Screw Corporation is also licensed to manufacture MAThread® and MATpoint®.

MAThread® and MATpoint® are patented thread designs.
MAThread and MATpoint are registered trademarks of MAThread Inc.

What is MATPoint®?

MATPoint® is one of the many available designs of MAThread®. The others are MAThread® dog point, MAThread® PPoint and MAThread® Radiused Point.

They are all extremely versatile and feed well in the application. The MAThread forces the two thread helixes to align, every time, without fail. The fasteners then drive easily, with reduced effort. MATPoint works with all types of nuts and internal threads, including lock nuts, making it very useful. It has unrivaled anti-cross thread performance whereby the MATPoint® never cross threads.

This is backed with a hundred percent success record. It makes paint cutters obsolete due to the fact that it is unaffected by paint in internal threads or excess paint. This new technology has changed the course of car assembly. Installers exclaim that it “glides in” and they are ecstatic over its ease and efficiency.

It aligns components by itself, even the must stubborn situations. This is done by MATPoint® finding holes and forcing itself straight up. It also fixes clogged internal threads because it slides through paint build ups.

It is user friendly and versatile, and more importantly, it never fails to work. Its superior performance level makes it attractive and trustworthy to all investors and it lives up to their expectation.

MATPoint® and the other MAThread® designs have delivered a track record like no other fastener.  Their ease of use has enabled labor reductions and its efficiency has reduced costs, replacements, and maintenance.

Specialty Screw Corporation located in Rockford Illinois is a manufacturer of Ball Studs, Cold Headed Fasteners, Cold Headed Products, Cold Headed Special Fasteners, Collar Studs, Collar Bolts, Automotive Screws, Automotive Fasteners, Metric Fasteners, Special Automotive Fasteners, Bolts, Special Bolts, Engineered Fasteners, Special Cold Forming, Special Cold Heading, Special Fasteners, Special Pins, Special Rivets, Double End Studs, and Synergistic Assemblies. Markets served include the Automotive, Electrical, Recreational, Hardware, Outdoor Power Equipment, Lawn & Garden, Distribution, Hand Tools and Molded rubber/plastic products industries. Specialty Screw Corporation is also licensed to manufacture MAThread® and MATpoint®.

MAThread® and MATpoint® are patented thread designs.
MAThread® and MATpoint® are registered trademarks of MAThread Inc.
Specialty Screw Corporation